How to maintain and use advertising barriers
Add Time£º2025/9/2 16:53:23
Instructions for using advertising barrier gates
Before use, it is necessary to check whether the power supply voltage is consistent with this product, that is, 220V ¡À 10%. In order to consider the existence of undervoltage in some areas, reliable working performance can still be maintained even when the voltage is as low as 180V.
When it is necessary to open the brake lever, press the "lift" button on the controller or remote control, and the brake lever will automatically lift and stop when it is in place.
When it is necessary to close the brake lever, press the "drop lever" button on the controller or remote control, and the brake lever will automatically drop and stop when it is in place.
During the process of lowering the gate, if vehicles or pedestrians pass by, press the "lift" button, and the gate will immediately move towards the lift direction, or press the "stop" button to interrupt the operation of the gate. (Note: Please do not press the "stop" button during normal operation)
If the gate is in a horizontal state during a power outage; You can open the door of the barrier gate box and lift the rod with your hand. After receiving a call, simply press the "drop rod" button, and the brake rod will automatically drop, restoring normal use.
Maintenance instructions for advertising barrier gates
Regularly use a soft and fine cloth to wipe off dust and oil stains on the surface of the chassis and keep it clean.
Regularly check the wiring parts of the control board for looseness, poor contact, etc., keep the control equipment in a ventilated and dry place, and do not wash or soak it in water to ensure its stable performance and improve the product's service life.
Regularly check the connection status of each connecting and moving part of the gate, and tighten any loose fasteners.
Regularly check the balance spring to ensure that there are no fractures or cracks in the spring.
Regularly inspect the reducer for any signs of oil leakage or other defects.
Regularly check the connection status of the system protection ground to ensure reliable contact of the system protection ground.
Before use, it is necessary to check whether the power supply voltage is consistent with this product, that is, 220V ¡À 10%. In order to consider the existence of undervoltage in some areas, reliable working performance can still be maintained even when the voltage is as low as 180V.
When it is necessary to open the brake lever, press the "lift" button on the controller or remote control, and the brake lever will automatically lift and stop when it is in place.
When it is necessary to close the brake lever, press the "drop lever" button on the controller or remote control, and the brake lever will automatically drop and stop when it is in place.
During the process of lowering the gate, if vehicles or pedestrians pass by, press the "lift" button, and the gate will immediately move towards the lift direction, or press the "stop" button to interrupt the operation of the gate. (Note: Please do not press the "stop" button during normal operation)
If the gate is in a horizontal state during a power outage; You can open the door of the barrier gate box and lift the rod with your hand. After receiving a call, simply press the "drop rod" button, and the brake rod will automatically drop, restoring normal use.
Maintenance instructions for advertising barrier gates
Regularly use a soft and fine cloth to wipe off dust and oil stains on the surface of the chassis and keep it clean.
Regularly check the wiring parts of the control board for looseness, poor contact, etc., keep the control equipment in a ventilated and dry place, and do not wash or soak it in water to ensure its stable performance and improve the product's service life.
Regularly check the connection status of each connecting and moving part of the gate, and tighten any loose fasteners.
Regularly check the balance spring to ensure that there are no fractures or cracks in the spring.
Regularly inspect the reducer for any signs of oil leakage or other defects.
Regularly check the connection status of the system protection ground to ensure reliable contact of the system protection ground.
