Integrated dust monitoring machine for construction sites in Guangdong Province
Welcome Calls：18802595529
Product Brief
Guangdong Province requires on-site installation and debugging of three major systems for construction sites: 1. Dust monitoring system 2. Real name attendance system 3. Construction site monitoring system. Free access to the construction bureau platform and one-stop service for construction site projects. The national construction platform is gradually being opened. Please contact customer service for confirmation.
Product Description
In order to strengthen the management of construction safety, utilize information management measures, and improve management efficiency, our bureau has added, optimized, and integrated functions such as supervision and management, construction lifting machinery, video surveillance, and dust monitoring on the basis of the "Construction Safety Supervision and Management System" (hereinafter referred to as the old system), forming a comprehensive "Zhongshan City Construction Engineering Safety Management System". After research, our bureau has decided to officially launch the system on August 10, 2012 The specific requirements are hereby notified as follows:
The online dust monitoring system in Zhongshan City is used to catch the platform of the Construction Bureau
（1） Installation quantity of video surveillance equipment
1. For buildings with a construction area of less than 20000 square meters, there shall be no less than 2;
2. For buildings with a construction area of 20000 square meters or more and less than 50000 square meters, there shall be no less than three;
3. There shall be no less than 4 buildings with a construction area of 50000 square meters or more.
4. The monitoring coverage of municipal infrastructure projects shall be determined based on the actual situation of the construction scope and the length of the lines, with no less than 2 projects per project.
5. At least one video surveillance point must be installed at each vehicle entrance and exit of the above-mentioned construction site.
According to the requirements of documents such as the "Notice of the General Office of the People's Government of Guangdong Province on Issuing the Management Measures for Dust Pollution Prevention and Control in Construction Projects in Guangdong Province (Trial)", "Implementation Plan for Winning the Blue Sky Defense War in Guangdong Province (2018-2020)", and "Management Measures for Dust Pollution Prevention and Control in Zhongshan City", construction dust monitoring equipment should be set up in a standardized manner. Construction sites with a building area of more than 50000 square meters should install at least one set of dust monitoring equipment on the inside of the main entrance and exit of the site or in areas where dust pollution is likely to occur in the construction work area (specific technical requirements are detailed in Annex 3), which should be uniformly connected to the dust monitoring platform of our bureau's Zhongshan City construction project safety management system, and directly connected to the management system through a 4GVPN network to achieve real-time data docking and exchange.
1. Real time monitoring. The construction site dust and noise monitoring system can monitor the noise and dust data of all construction site monitoring points and provide real-time updates. At the same time, the construction site dust and noise monitoring system can also load the noise and dust values of each construction site monitoring point, and display the timeline waveform of each monitoring point in the monitoring center based on these values.
2. Alarm warning. The construction site dust and noise monitoring system can automatically trigger an alarm for micrograms. When the alarm value of the construction site monitoring point is pre-set, it will immediately sound an alarm once it exceeds the alarm value. At the same time, the construction site dust and noise monitoring system can automatically identify the noise and dust values, and automatically trigger system alarms and locate the clear geographical location of the construction site
3. Trend analysis. The construction site dust and noise monitoring system can display the trend chart of noise and dust on the client software, making it more convenient for users to analyze the trend of noise and dust in north-south time. At the same time, it can also analyze real-time and historical trends to gain a clear understanding of the dust and noise situation at the construction site during a certain period of time, thereby providing scientific basis for supervision. In addition, its optional meteorological parameters can exceed the role of predicting and warning of pollution conditions in the later stage.
4. Search for historical data. A professional construction site dust and noise monitoring system can preserve data and ensure the collection of all noise and dust values. At the same time, in the later stage, historical data can be used to analyze the areas of noise and dust and decompose reports. This real-time data created on the basis of the database facilitates the search and analysis of data.
The online dust monitoring system in Zhongshan City is used to catch the platform of the Construction Bureau
The dust online monitoring equipment mainly uses particle concentration sensors as the main means of monitoring dust status, collecting information on the concentration of dust particles on the construction site, including key information such as PM2.5, PM10, TSP, etc; Equipped with wind direction sensors, anemometers, and noise sensors to monitor on-site wind direction, speed, and noise as auxiliary information for dust status. At the same time, the online monitoring equipment is equipped with an automated information collection module, which collects 24-hour information from sensors through high-performance embedded systems, and uploads the data to the server through a 4GVPN network to achieve real-time online monitoring. The dust online monitoring equipment should also have the China Environmental Protection Product Certification (CCEP) issued by the Ministry of Environmental Protection and the Certificate of Approval for Measuring Instrument Form (CPA) issued by the provincial (municipal) metrology institute. To provide effective and accurate reference information to management and construction units, the above sensors should meet the following standards:
1、 PM2.5/PM10/PM100 (TSP) sensors
Range: 0-1000ug/m3; Resolution: 1ug/m3; Accuracy: ± 8% F · S;
2、 Wind direction sensor
Range: 8 orientations
3、 Wind speed sensor
Range: 0-60m/s; Resolution: 0.1 m/s; Accuracy: ± 0.3m/s.
4、 Noise sensor
Range: 30-130db; Resolution: 0.1db; Accuracy: ± 0.5% F · S.
The online dust monitoring system in Zhongshan City is used to catch the platform of the Construction Bureau
（1） Installation quantity of video surveillance equipment
1. For buildings with a construction area of less than 20000 square meters, there shall be no less than 2;
2. For buildings with a construction area of 20000 square meters or more and less than 50000 square meters, there shall be no less than three;
3. There shall be no less than 4 buildings with a construction area of 50000 square meters or more.
4. The monitoring coverage of municipal infrastructure projects shall be determined based on the actual situation of the construction scope and the length of the lines, with no less than 2 projects per project.
5. At least one video surveillance point must be installed at each vehicle entrance and exit of the above-mentioned construction site.
According to the requirements of documents such as the "Notice of the General Office of the People's Government of Guangdong Province on Issuing the Management Measures for Dust Pollution Prevention and Control in Construction Projects in Guangdong Province (Trial)", "Implementation Plan for Winning the Blue Sky Defense War in Guangdong Province (2018-2020)", and "Management Measures for Dust Pollution Prevention and Control in Zhongshan City", construction dust monitoring equipment should be set up in a standardized manner. Construction sites with a building area of more than 50000 square meters should install at least one set of dust monitoring equipment on the inside of the main entrance and exit of the site or in areas where dust pollution is likely to occur in the construction work area (specific technical requirements are detailed in Annex 3), which should be uniformly connected to the dust monitoring platform of our bureau's Zhongshan City construction project safety management system, and directly connected to the management system through a 4GVPN network to achieve real-time data docking and exchange.
1. Real time monitoring. The construction site dust and noise monitoring system can monitor the noise and dust data of all construction site monitoring points and provide real-time updates. At the same time, the construction site dust and noise monitoring system can also load the noise and dust values of each construction site monitoring point, and display the timeline waveform of each monitoring point in the monitoring center based on these values.
2. Alarm warning. The construction site dust and noise monitoring system can automatically trigger an alarm for micrograms. When the alarm value of the construction site monitoring point is pre-set, it will immediately sound an alarm once it exceeds the alarm value. At the same time, the construction site dust and noise monitoring system can automatically identify the noise and dust values, and automatically trigger system alarms and locate the clear geographical location of the construction site
3. Trend analysis. The construction site dust and noise monitoring system can display the trend chart of noise and dust on the client software, making it more convenient for users to analyze the trend of noise and dust in north-south time. At the same time, it can also analyze real-time and historical trends to gain a clear understanding of the dust and noise situation at the construction site during a certain period of time, thereby providing scientific basis for supervision. In addition, its optional meteorological parameters can exceed the role of predicting and warning of pollution conditions in the later stage.
4. Search for historical data. A professional construction site dust and noise monitoring system can preserve data and ensure the collection of all noise and dust values. At the same time, in the later stage, historical data can be used to analyze the areas of noise and dust and decompose reports. This real-time data created on the basis of the database facilitates the search and analysis of data.
The online dust monitoring system in Zhongshan City is used to catch the platform of the Construction Bureau
The dust online monitoring equipment mainly uses particle concentration sensors as the main means of monitoring dust status, collecting information on the concentration of dust particles on the construction site, including key information such as PM2.5, PM10, TSP, etc; Equipped with wind direction sensors, anemometers, and noise sensors to monitor on-site wind direction, speed, and noise as auxiliary information for dust status. At the same time, the online monitoring equipment is equipped with an automated information collection module, which collects 24-hour information from sensors through high-performance embedded systems, and uploads the data to the server through a 4GVPN network to achieve real-time online monitoring. The dust online monitoring equipment should also have the China Environmental Protection Product Certification (CCEP) issued by the Ministry of Environmental Protection and the Certificate of Approval for Measuring Instrument Form (CPA) issued by the provincial (municipal) metrology institute. To provide effective and accurate reference information to management and construction units, the above sensors should meet the following standards:
1、 PM2.5/PM10/PM100 (TSP) sensors
Range: 0-1000ug/m3; Resolution: 1ug/m3; Accuracy: ± 8% F · S;
2、 Wind direction sensor
Range: 8 orientations
3、 Wind speed sensor
Range: 0-60m/s; Resolution: 0.1 m/s; Accuracy: ± 0.3m/s.
4、 Noise sensor
Range: 30-130db; Resolution: 0.1db; Accuracy: ± 0.5% F · S.
Previous：No Data
Next：Zhongshan construction site dust monitoring machine
Next：Zhongshan construction site dust monitoring machine
